|
|
|
|
|
|
|
|
|
|
|
|
|
Equipment & Suggested Price 2004* |
|
|
|
|
|
|
|
|
Volvo Penta Power |
MSRP |
|
MD 2030 (Diesel) 28hp (20kW) |
$296,725 |
|
|
|
|
Standard Equipment |
|
|
Hull |
|
|
White,
high-temperature NGA gelcoat is sprayed up in the moulds. The hull is laid up
by |
|
|
hand
lay-up in a female mould. The hull is partially laminated in isopolyester,
partially in |
|
|
DCPD-Ortho
polyester. A sandwich laminate made of 20mm PVC core is used all through |
|
|
the
hull. Multi-axial stitched roving & chopped strand mat is used as
reinforcement with |
|
|
uni-directional
glass in high load areas. The keel area is a solid laminate as well as
the |
|
|
laminate
around major through hull fittings. Smaller through hulls have the edges of
the |
|
|
sandwich
treated with a sealer. White topcoat on the hull in all lockers, bilges and
similar |
|
|
exposed areas. Striping with blue vinyl tape. Hull Color,
White or Blue. |
|
|
|
|
Internal Reinforcements |
|
|
Female
molded hull stiffening and inner liner grid. Grid molded in white gelcoat
and |
|
|
DCPD-ortho
polyester using tri-axial and uni-directional glass in top hat sections.
Forward |
|
|
and
aft the grid is glued to the hull using polyester putty Prestocol TH 725 A or
similar. In |
|
|
the
keel area the grid is hand laminated to hull. A structural ring frame
incorporating |
|
|
marine
plywood bulkheads, multiple hand laminated shelves and tophat stiffeners |
|
|
distribute
the load from shrouds. The grid is prepared with hose and cable runs.
Structural |
|
|
marine
plywood bulkheads are glued, bolted and/or laminated to the hull. All
marine |
|
|
plywood is Water and Boil Proof in compliance with British
Standard 1088. |
|
|
|
|
|
Keel |
|
|
2.00m
draft lead/antimony(2.5%) casting with incorporated bulb. Thin keel fin and a
low |
|
|
centre
of gravity. Keel is bolted with M20 AISI 316L stainless steel bolts. 10mm
keel |
|
|
washers in stainless steel. |
|
|
|
|
|
Rudder & Tiller Steering |
|
|
Hand
laminated rudder blade using white gelcoat, bi-axial and uni-directional
E-Glass |
|
|
reinforcement
in a polyester resin. Balanced spade rudder. φ73mm aluminum EN 6082 |
|
|
rudder
stock double tapered with three wings welded to the stock. The wings of the
stock |
|
|
are
laminated to one half of the rudder before assembly. The blade halves are
laminated |
|
|
and
glued together. The top and bottom bearing is an acetal needle bearing for
minimum |
|
|
resistance
and maintenance. Rack and pinion steering with a drag link. Leather
covered |
|
|
φ1220mm
wheel with tandem spokes and friction brake. Glove boxes in cockpit with
teak |
|
|
frames. Emergency tiller made of aluminum. |
|
|
|
|
|
Deck |
|
|
White,
high-temperature NGA gelcoat is sprayed up in the moulds. The deck is laid up
by |
|
|
hand in a female mould with integrated anti slip surfaces. The
deck is laminated in DCPD- |
|
|
Ortho polyester. A sandwich laminate made of 15mm & 20mm
PVC core is used in all |
|
|
horizontal
surfaces. Chopped Strand Mat is used around recesses for hatches. All
fittings |
|
|
are
fixed in either single laminates or a sandwich with a marine plywood or
aluminum |
|
|
core.
The deck is glued to the hull using polyester putty, and subsequently bolted
using M8 |
|
|
bolts
c-c 200mm.The deck includes grooves and platforms for hatches and lids.
Striping |
|
|
with
blue vinyl tape. White topcoat in all visible areas. Teak Deck. |
|
|
Teak in Cockpit and Bathing Platform |
|
|
|
|
|
Deck Equipment for Sail Handling |
|
|
2x halyard winch Lewmar 40CST Chrome; 2x primary winch Lewmar
44CST Chrome |
|
|
1x mainsheet track Lewmar L=1245mm, Sz 2 2x jib track Lewmar
Sz 1 |
|
|
2x clutch Lewmar double 10-12mm; 2x genoa track Lewmar 32mm
T-Track |
|
|
1x clutch Lewmar single 6-8mm; 2x clutch Lewmar triple 10-12mm |
|
|
2x genoa car Lewmar T-Track; 2x organizer Lewmar 5-sheaves
acetal |
|
|
2x jib car Lewmar Ocean Sz 1; 1x mainsheet car Lewmar Ocean sz
2 |
|
|
3x blocks Lewmar Sz 1; 12x blocks Lewmar Sz 2 |
|
|
2x blocks Lewmar Racing 6:1 mainsheet; 2x blocks Lewmar 6:1
backstay |
|
|
2x winch handle Lewmar Power grip 12”; 1x winch handle Lewmar
Power grip 10” |
|
|
4x foot blocks Lewmar Racing 80mm 2x servo cleats |
|
|
|
|
Ventilation, Windows, Skylight and Portlights |
|
|
Skylight stainless steel frame 20” square 1x forward cabin |
|
|
Skylight stainless steel frame 24” square 1x saloon |
|
|
Port light, stainless steel frame, opening 1x toilet, 2x aft
cabin, 2x saloon |
|
|
Stainless steel framed acrylic windows 4x saloon |
|
|
Ventilator, type Electrolux stainless steel 1x saloon |
|
|
Ventilator, stainless steel 5x aft storage |
|
|
Ventilation from owners cabin into cockpit. |
|
|
Ventilation in heads |
|
|
Ventilation in SB aft storage into SB cockpit glove-box |
|
|
|
|
Hatches and Lids |
|
|
Companionway door in teak |
|
|
GRP molded hatches on deck: |
|
|
(All hatches in sandwich laminate) 2x anchor-well forward |
|
|
1x anchor-well aft 40N cylinder spring |
|
|
1x aft storage SB 80N cylinder spring |
|
|
1x aft storage BB 80N cylinder spring |
|
|
1x cockpit storage SB 2x40N cylinder spring |
|
|
There are two 10mm acrylic hatches on deck 1x companionway
sliding hatch |
|
|
1x aft cockpit/bathing platform |
|
|
|
|
|
Other Deck Grear |
|
|
Sprayhood;
blue canvas with stainless steel tubing. Handle on edge of sprayhood
towards |
|
|
cockpit.
Teak foot rail without holes. 2x4mm lifelines 600mm above deck, swaged |
|
|
terminals. 8x Stainless steel stanchions. Guard wire gate in
stern. Silva compass on |
|
|
steering
pedestal. U-bolt for attachment of end of anchor rode in for and aft anchor
well. |
|
|
Flagpole
900x25mm Teak at SB side of pushpit. 4x halyard bags with Maxi logo
(supplied |
|
|
loose). |
|
|
Transport Cradle (Maxi 1050/1100, Normal Keel) |
|
|
Transport/Storage Protection Cover |
|
|
|
|
Stainless Steel Deck Gear |
|
|
All AISI 316L acid proof steels. Hand polished. Pulpit 25mm 1x
Bow |
|
|
Pushpit 25mm 1x SB stern |
|
|
1x Port stern |
|
|
Chain plate 1x Forestay w/ 2x bow rollers |
|
|
1x SB & Port shrouds |
|
|
Handrail, 25mm 2x cabin roof top |
|
|
Bathing ladder Bathing platform through bolted in anchor well
aft |
|
|
Mooring Cleats 6x 265x70 |
|
|
Mooring rope chafe protection 6x (one at every mooring cleat) |
|
|
Backstay attachment 2x plates |
|
|
Sliding hatch 2x covers in companionway |
|
|
Padeye Folding 6mm 4x Wichard |
|
|
|
|
|
Interior |
|
|
Interior in mahogany covered with 3 layers of varnish to a
satin finish. Acid curing semi- |
|
|
gloss alkyd varnish. All cushions in suede velour fabrics. All
doors and drawers have push- |
|
|
button locks to keep closed. 4x large pillows & 4x small
pillows with Maxi logo. |
|
|
|
|
Saloon |
|
|
3x
seat cushions starboard and 1x seat cushion port. 1x fill in cushion. 2x
backrest |
|
|
cushions
which can be raised for sleeping. Mahogany saloon table with flaps for ease
of |
|
|
passage and lid for storage. 4x louvered doors in lockers. 2x
shelves aft of chain plate |
|
|
boxes.
Hull cladding in ribbed mahogany. Curtains fitted in covered tracks.
Detachable |
|
|
wood
panels in ceiling. Solid mahogany mast trims. Fabric cover for mast section
above |
|
|
saloon
table. Access to storage below seat cushions. Hand rail in ceiling. Double
berth on |
|
|
starboard when extension pulled out. Luan floors with carpet. |
|
|
|
|
Galley |
|
|
Laminate
countertop in cream color. Laminated wooden trims on counter. Stainless
steel |
|
|
double sink. 2x shallow drawers & 1x |
|
|
deep
drawer. Top loaded fridge 75L Isotherm w/ Danfoss compressor. Waste bucket
under |
|
|
sink.
2x louvered doors above stove. 1x hatch below stove. 1x hatch outside of
stove. 2x |
|
|
doors under sink. Purpose made storage of service in locker.
Oiled teak floor. |
|
|
|
|
|
Navigation Station |
|
|
1x
seat cushion. 1x chart table w/ wooden trims all around. 3x drawer below
chart table. |
|
|
Storage
under nav seat. Locker for books. Electrical switch panel on separate
wooden |
|
|
panel. |
|
|
|
|
Forward Cabin |
|
|
Sliding
door. 2x sleeping cushion. 1x fill-in cushion. Hull cladding in ribbed
mahogany. |
|
|
Blinds
for skylight. Ceiling in detachable panels. 2x locker door with frame below
the berth. |
|
|
Shelves
along hull sides. Hanging lockers on port and starboard. 4x louvered locker
doors. |
|
|
Carpet. |
|
|
|
|
Owner's Cabin |
|
|
2x
sleeping cushion. Hull cladding in ribbed mahogany. Ceiling made of
detachable panels. |
|
|
2x
louvered hanging locker doors. Shelve along hull side. 2x curtain on
aluminium pipes. |
|
|
Door for easy access into engine-room. Luan floor with carpet.
Mirror. |
|
|
|
|
Heads |
|
|
Shower
sump discharge pump SWN1100-12V. Wet locker aft of heads. Stainless steel
sink |
|
|
with
discharge. Toilet paper holder behind locker door. 2x hooks for clothing.
Door holder |
|
|
secure
door in open position. 2x mugs with holder. Mirror sliding doors above
toilet |
|
|
counter
top. Acrylic seat on top of toilet bowl. Mirror on door. Stainless handhold
on |
|
|
washbasin. |
|
|
|
|
Mast & Rigging |
|
|
Mast
is fractionally rigged with a keel stepped mast base. Seldén C211x110mm
mast |
|
|
section made of silver anodised aluminum. Mast
head: Head box with sheaves for main |
|
|
halyard & main topping lift, clevis pin for backstay,
Windex. Instr. base. Hounds: Sheave |
|
|
box
spinnaker halyard, Spin halyard lead, Nose for forestay, Shroud backing
plate, |
|
|
Sheave box for jib halyard. |
|
|
Sheave box for topping lift. |
|
|
Spreaders: 2 sets of anodized aluminum
airfoil sectioned spreaders with spreader |
|
|
brackets. Sweep angle 21°. |
|
|
Lights: Steaming light Flood light |
|
|
1xSpinpole eyes 6x rope slot fittings |
|
|
Deck Level: Boom bracket, Kicker bracket,
Deck ring assembly, Tie rod assembly, |
|
|
Mast heel & mast base. |
|
|
|
|
Boom |
|
|
Silver
anodized aluminum alloy boom section 171x94mm. Internal outhaul. 2 single
line |
|
|
reefs, 1 flattening reef. |
|
|
Inboard end Inboard bracket |
|
|
Along boom 1x kicker slider, 1x sheet
slider |
|
|
Outboard End Outboard bracket |
|
|
|
|
Standing Rigging |
|
|
Discontinuous stainless steel 1x19strands wire-rigging.
Stud-toggle rigging screws. |
|
|
Forestay,
FURLEX 208 8mm Intermediate shroud, stemball <> swage 6mm, 3/8”
rigging |
|
|
Screw
Upper Cap shroud, eye <> Terminal 8mm Lower cap shroud, fork <>
screw |
|
|
10mm,
5/8” rigging screw Permanent backstay, eye <> fork 7mm Aft lower
shroud, |
|
|
stemball <> swage 8mm, 1/2” rigging screw Backstay
bridle, 7x19strands 6mm |
|
|
|
|
Running Rigging |
|
|
1x Main halyard 6mm, 13,9m 7x19 wire 12mm, 20,5m 16/16 rope
Shackle |
|
|
1x Genoa halyard 6mm, 12,8m 7x19 wire 12mm 19,9m 16/16 rope
Snap shackle, blue ball |
|
|
1x Main topping lift 10mm, 33m 16/16 rope Shackle |
|
|
1x Main Sheet 12mm, 30m 16/16 rope |
|
|
2x Genoa / Jib sheets 14mm, 13m, 16/16 rope |
|
|
1x Vang Control 12mm, 8m, 16/16 rope |
|
|
1x Backstay 6mm, 5,5m, 7/19wire 10mm, 10mm 16/16 rope |
|
|
1x Mainsheet car 8mm, 11m, 16/16 rope |
|
|
2x Genoa Car 8mm, 9.5m, 16/16 rope |
|
|
1x Cunningham 10mm, 5m, 16/16 rope |
|
|
1x Lazy Jacks |
|
|
|
|
Boom Vang |
|
|
Seldén rod kicker Type 20. |
|
|
|
|
|
Sails |
|
|
All sails by ElvströmSobstad Sails. |
|
|
Mainsail.
39 m2. Cross cut dacron 380 gr/m2. 2 reefs, 4 battens. Leech line. Loose
foot. |
|
|
Nylon sail-sliders. Sail numbers, class |
|
|
mark, tell tales on leech. Sail bag. |
|
|
Mainsail cover. Blue canvas. |
|
|
Jib.
31 m2. 105%. Cross cut dacron 360 gr/m2. Sail is prepared for Furlex.
Vertical |
|
|
battens. Leech line, UV Protection, |
|
|
Tell-tales. Sail bag. |
|
|
|
|
Engine & System |
|
|
All
through hull fittings close to waterline and below have shut-off ball valves.
All hoses are |
|
|
attached to through hulls with double stainless steel hose
clamps. |
|
|
|
|
Engine |
|
|
A
three-cylinder Volvo Penta MD2030 engine with a MS25S sail drive. Freshwater
cooled. |
|
|
Teleflex
Morse engine controls. Volvo Penta fuel filter. Vetus vacuum valve. Volvo
Penta |
|
|
muffler.
Well soundproofed engine room. Folding 3-blade propeller. Engine panel
in |
|
|
cockpit. |
|
|
|
|
Fuel System |
|
|
Fuel
tank 93 L. Stainless steel. Inspection hatch in tank. Fuel feed and return
hose with |
|
|
shut-off
valves. Fuel feed for diesel heater. 38mm fill hose. 19mm ventilation hose.
Fuel |
|
|
level indicator on navpanel. |
|
|
|
|
LPG System |
|
|
2-burner
LPG stove, gimballed. 3kg LPG bottle with ventilated storage port and
starboard |
|
|
in
cockpit. Pressure reduction valve 30mBar. Shut-off valve at stove. Continuous
copper |
|
|
pipe
8x1mm from bottle to stove. 400mm LPG hose at bottle. 1000mm LPG hose at
stove. |
|
|
Swaged terminals on LPG hoses. |
|
|
|
|
Bilge Water System |
|
|
Electrical
bilge pump SWN1100-12V in heads Suction point at keel sump Discharge
below |
|
|
sheer line |
|
|
Manual bilge pump 1 1/2” in saloon Suction point ast keel sump
Discharge above waterline |
|
|
Manual bilge pump 1 1/2” cockpit Suction point in engine room
Discharge below sheer line |
|
|
|
|
Head System |
|
|
Water
tank stainless steel 220L. Inspection hatch in tank. Water level indicator on
nav |
|
|
panel.
Pressurized freshwater pump WPS 3.4-12V. Hot water calorifier Isotherm
22L, |
|
|
expansion hose fitted overboard. Single lever tap in galley.
Single lever tap with shower |
|
|
hose in heads. Hot and cold shower on bathing platform. |
|
|
|
|
Head System |
|
|
Toilet
bowl. Manual pump. Polyethylene septic tank. Discharge overboard 50mm.
Deck |
|
|
suction
point 38mm. Ventilation hose. Vacuum valve for toilet seawater intake.
Sanitary |
|
|
hose. |
|
|
|
|
Navigation and Interior Lights |
|
|
All navigation lights comply with COLREG 1972. |
|
|
3x Navlights Lantern stern, white Lantern bow, red/green
Steaming light, white |
|
|
8x Reading lamp, chrome Saloon Aft cabin Forward cabin |
|
|
1x Reading lamp, black flexible Nav table |
|
|
3x Light switch, chrome Saloon Forward cabin Owners cabin |
|
|
11x Ceiling lights Saloon Forward cabin Owners cabin Heads
Galley |
|
|
3x Locker light SB aft locker Port aft locker Cockpit locker |
|
|
|
|
Electrical System |
|
|
The
electrical system is 12volts. The main cable runs are placed in accessible
channels. |
|
|
The battery bank contain 1x starting battery |
|
|
75Ah and 3x service batteries 75 Ah. One switch panel is
placed at the navigation table; |
|
|
Circuit breakers: |
|
|
Nav Lights Steaming Light Deck Light Anchor Light 3-colour
Light VHF/Radio |
|
|
Instr/Radar Autopilot Aux Interior Lights 1 Interior Lights 2
Interior Lights 3 |
|
|
FW pump Bilge pump Shower pump Fridge Power |
|
|
Level gauges: |
|
|
Fuel Level Water Level Voltmeter |
|
|
12V socket. Navpanel Cockpit Heads Toilet |
|
|
Main circuit breaker panel placed at companionway: |
|
|
Fuse Groups Radio/Mem Clock Heater Bilge
Pump Aux |
|
|
Main Switches Engine Aux |
|
|
Battery charging by 60Amp generator on the engine. Charging
regulator. |
|
|
Depth Raymarine ST60 |
|
|
Speed Raymarine ST60 |
|
|
4 x mooring rope 4x fenders & fender socks Decal for
lifting slings |
|
|
Tool bag Boat hook, telescopic Brush with telescopic handle |
|
|
Document Bag containing complete set of instruction manuals
Maxi Yachts service |
|
|
|
|
|
|
Optional |
|
Optional Equipment |
Price |
|
Anchor Winch (Electric) on Bow, Lewmar 1000W (1050 incl.
Anchor Roll) |
$3,680 |
|
Anti-fouling |
$2,180 |
|
Autopilot Smartpilot S1 ST6001 STD |
$5,455 |
|
Barometer & Clock, Chrome |
$460 |
|
Bedset for 4 Persons |
$1,099 |
|
Bowsprit |
$3,759 |
|
Cockpit Cushions |
$700 |
|
Cooker with Oven & Grill; Add |
$460 |
|
Commission, Launch and Rigging |
$2,297 |
|
DVD Player |
$859 |
|
Gennaker, Full Radial |
$3,779 |
|
Gennaker Equipment |
$1,580 |
|
Genoa 1 Racing, Trioptimal, Kevlar excl. UV-protection |
$3,416 |
|
Furlin Jib 105%, Offshore Tri-optimal Sandwich incl.
UV-Protection |
$1,799 |
|
GPS Raynav 300 incl. Antenna |
$1,559 |
|
Heater, Ardic (for M1050: Ebersprächer Air Heater) |
$3,957 |
|
Mainsail, Racing 2+2 Battens, Kevlar incl. 2 Reefs |
$4,619 |
|
Mainsail, Offshore Bi-Radial Sandwich Fullbatten incl. 2 Reefs |
$2,198 |
|
Mainsail, Fullbatten incl. 2 Reefs and Lazy Jacks |
$799 |
|
Mainsail; 3-rd Reef |
$220 |
|
Mast, Tapered Top Section (1050 l=2.500, 1100 l=3.000): Add |
$760 |
|
Multirepeater Raymarine ST60 |
$960 |
|
Plotter Raychart 435 6" Color Screen at Pedestal, incl.
Antenna |
$3,180 |
|
Plotter Raymarine SL530 7" Color Screen at Pedestal,
incl. RS120 Antenna |
$5,579 |
|
Radar/Plotter Raymarine SL70CRC 7" Color Screen at
Pedestal, incl. Antenna 1) |
$10,619 |
|
Radio / CD incl. 2 Speakers in Saloon & 2 in Cockpit |
$1,360 |
|
Shore Power 120V or 240V incl. Battery Charger 25A |
$2,282 |
|
Spinnaker, All Purpose |
$4,316 |
|
Spinnaker Boom Racing incl. Sheets, Guys and Blocks |
$2,956 |
|
Spinnaker Boom Cruising incl. Sheets, Guys and Blocks |
$2,500 |
|
Spinnaker Boom Track on Mast |
$520 |
|
Spinnaker Sock |
$780 |
|
Spinnaker Winches, Lew 44ST (2 Nos.) |
$2,210 |
|
Spinnaker Halyard, Additional (Makes Two in Total) |
$255 |
|
Sprayhood Extension |
$2,480 |
|
Steering Pedestal Cover |
$420 |
|
Transport Cradle, Maxi 1050/1100 Low Keel |
$2,148 |
|
Transport Factory Visby-Gothenburg |
$3,630 |
|
Transport Factory Visby-Sthlm |
$2,726 |
|
TV 10,4" LCD incl Mast Top Antenna |
$1,840 |
|
Wheel 52" (1,320 mm) |
$220 |
|
VHF Ray 215E DSC incl. Antenna |
$1,861 |
|
VHF Ray 230E TFM incl. Antenna |
$3,518 |
|
VHF Ray 230E TFM; Add for 2nd Hand Unit |
$860 |
|
Wind Instruments, Raymarine ST 60 |
$1,600 |
|
Maxi 1050 / 1100 Low keel (1.50 m); Add |
$1,600 |
|
|
|
|
|
1) Requires optional Autopilot
Compass Based on Gyro |
|
|
All sails by Elvström/Sobstad |
|
|
Prices for mainsails and jibs/genoas are additional prices
over standard sails. |
|
|
Prices for extra equipment are only valid if ordered before
building of the boat has started. |
|
|
|
|
|
*
Prices are based on MSRP and are in U.S. dollars. Prices are |
|
|
subject to change and
retailers price may vary. |
|
|
|
|
|
|
|
|
Phone: +1.469.358.2236 or +1.214.680.0185 |
|
e-mail: info@swemarine.com www.swemarine.com |
|
|
|
